The 300 mm reciprocating saw blade is made of HCS (High Carbon Steel), making it suitable for sawing in soft and untreated wood. The material provides a good balance between flexibility and strength, allowing the blade to withstand stress during fast cuts.

The blade is designed for coarse wood without nails with a thickness of up to 250 mm, as well as for pruning green wood with a diameter under 250 mm. It is therefore suitable for both construction tasks and gardening where quick and efficient cutting is required.

The design makes it compatible with most reciprocating saws, and it can be used for both professional and private purposes where a simple and reliable blade for woodworking is desired.

The Festool RSC 18 5.0 EB-Plus is a battery-powered reciprocating saw developed for demanding sawing tasks in wood, metal, and construction materials. It is equipped with a brushless EC-TEC motor that delivers high efficiency and long service life, while the low vibration level ensures stable and controlled operation during work.

The saw has a pendulum stroke that can be activated as needed, increasing cutting speed for rougher tasks. The variable speed trigger provides precise control over the stroke rate, and the integrated LED lighting improves visibility in the work area.

The RSC 18 is built to withstand tough working conditions and comes in a practical Systainer³, making transport and storage easy. The saw blade can be rotated 180 degrees, allowing cutting close to walls, ceilings, and floors.

The delivery scope includes two 18 V 5.0 Ah batteries, a fast charger, an extraction device, a universal wood blade, and a Systainer³ storage case.

The Milwaukee Reciprocating Saw Blade Set + TCT 13P consists of 13 Sawzall blades developed for efficient cutting in various materials. The blades have a tapered body, which makes it possible to perform tight radius and edge cuts, providing better control for precision work.

The optimised tooth geometry with 30 TPI is suitable for sawing in thin materials between 0.6 and 1.5 mm. The set includes both WRECKER, AX and TORCH blades, covering everything from wood with nails to metal and carbide.

The blades are made of robust material that ensures long life and efficient performance, whether working with demolition, installation or precision tasks. The combination of lengths of 150 mm and 230 mm provides flexibility for different types of cuts.

The Dewalt Reciprocating Saw 18V XR Compact 1x Battery is a cordless saw designed to deliver high performance in a compact format. The brushless motor contributes to longer lifespan and more efficient energy use, allowing for longer operation on a single charge.

The compact gearbox design reduces vibrations and increases comfort during use. According to the manufacturer, the vibration level is around 5.5 m/s² when working in wooden beams and 8.1 m/s² in wooden boards, making it suitable for longer tasks.

An integrated LED light improves visibility in dark or confined work areas, allowing the user to work more precisely. The saw’s construction combines metal parts with a robust plastic handle, providing a good balance between strength and manageability.

This model comes with one battery and is part of Dewalt’s XR series, known for efficiency and compatibility across tools in the same battery system.

The CMT Reciprocating Saw Blade 150mm HM Spec is a powerful saw blade designed for use with reciprocating saws. It is made with carbide teeth (HM), which provide long life and efficient cutting performance in demanding materials.

The blade is suitable for cutting porous concrete, brick, Eternit, fibre cement, plasterboard, fibreglass, epoxy (up to 100 mm), wood and nails, as well as MDF. It combines precision with robustness, making it suitable for both construction and renovation tasks.

With a length of 150 mm, it provides good control and stability during work, while being able to handle materials of varying hardness. It is a practical choice for tradespeople who need a durable blade for many types of tasks.

The Metabo SSEP 1400 MVT is a powerful reciprocating saw developed for demanding tasks where high performance and precision are required. It is equipped with a 1400 watt motor that delivers constant power even under heavy load.

The saw has a 3-stage pendulum function that can be adjusted to the material to achieve an optimal cut. The function makes it possible to choose between fast feed or more controlled sawing depending on the task.

The Metabo VibraTech (MVT) system reduces vibrations through integrated balancing, providing better comfort and less fatigue during prolonged use.

The delivery includes saw blades for both wood and metal as well as a practical plastic case for transport and storage.

Reciprocating Saw Blade 150mm BIM Heavy is a powerful blade designed for use with reciprocating saws. It is made of bimetal (BIM), which provides a combination of flexibility and wear resistance, allowing it to withstand stresses when cutting hard materials.

The blade is intended for cutting wood with nails or metal, chipboard up to 100 mm, fibreglass, plastic and epoxy up to 50 mm, as well as plasterboard. It is particularly suitable for curved cuts where precision and control are important.

With a length of 150 mm, it provides a good balance between reach and stability, making it suitable for both precision work and rougher tasks. It is part of CMT’s range of professional blades for tradespeople and DIY users.

The Milwaukee Reciprocating Saw Blade TCT WRE 300/6T 5P is part of the WRECKER™ series and is designed to handle demanding demolition tasks in various materials. The carbide-reinforced teeth enable the blade to cut through thick metal, cast iron, wood with nails, as well as hardened screws and bolts.

The blade has a lifespan up to 50 times longer than standard Bi-Metal blades, making it suitable for intensive use. At the same time, the design provides up to 25% more cuts per charge when used with battery-powered saws.

The so-called FANG TIP™ tip makes it easier to start the cut, even in tight spaces, and allows for plunge cutting. With a thickness of 1.27 mm, precise, straight cuts are achieved, while the blade height of 25 mm contributes to stability and reduces vibrations during work.

The blade comes in a pack of five and is intended for professional and experienced users who need a durable and efficient tool for versatile demolition tasks.

Reciprocating Saw Blade 200mm BIM Prog is a saw blade designed for use with reciprocating saws. It is made of bimetal (BIM), which provides a combination of flexibility and wear resistance, allowing the blade to withstand stress when cutting hard materials.

The blade is intended for cutting wood with nails or metal, chipboard up to 150 mm, metal sheets and aluminium profiles with thicknesses between 3 and 18 mm, as well as fibreglass and plastic/epoxy up to 150 mm. This versatility makes it suitable for both construction and renovation tasks where materials vary.

With a length of 200 mm, the blade provides a good balance between precision and cutting depth, making it practical for both rough and finer cuts. It can be used in standard reciprocating saws with a compatible fitting.

The Milwaukee TCT WRE 150/6T is a multi-material reciprocating saw blade designed to handle both metal, cast iron, wood with nails, as well as hardened screws and bolts. The blades are equipped with carbide teeth, which provide significantly longer life than traditional bi-metal blades.

The optimised design makes them particularly suitable for use with battery-powered saws, where efficiency and energy consumption are crucial. According to the manufacturer, they can deliver up to 25% more cuts per charge compared with standard bi-metal models.

The blades have a thickness of 1.27 mm, which contributes to precise, straight cuts, while a blade height of 25 mm provides increased stability and reduces vibrations during work. The distinctive FANG TIP™ tip makes it easier to start the cut, even in tight spaces, and enables plunge cutting.

The set consists of five blades with a length of 150 mm and a tooth geometry of 6T, making them suitable for demolition tasks in various materials where robustness and versatility are required.

The 225 mm reciprocating saw blade is made of BIM (bimetal), which provides a combination of flexibility and wear resistance. It is designed to handle medium to thick metal sheets in the range of 2–10 mm as well as thin- and thick-walled pipes and profiles up to 175 mm in diameter.

The blade is suitable for demolition work in metal where precise and controlled cuts are required. It delivers light and fine cuts, making it suitable for both rougher tasks and more detailed trimming.

With its robust construction and efficient tooth geometry, it is a practical choice for professional users working in metalworking, assembly, or disassembly.